| Customization: | Available |
|---|---|
| After-sales Service: | Online Service /Door to Door |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.This model is the crane type gantry with rotary-table,the XYZ linear axis are all above the base to control the spindle and the tool,the AC rotating axis (rotary table) control workbench and workpiece.
2.Y-axis is symmetrical dual-drived with two motors, which takes less rear space in the machine than the the traditional Y-axis single drive(one motor)(T-shaped design).
3.The spindle container, has four guide rails on the 4 corner, and this kind of high rigidity design, can make the spindle play more powerful performance.
| Working range | |||
| X/Y/Z traverse path |
660/900/520 | Unit:mm | Y:before-A-axis ,400,behind-A-axis ,500 |
| A-center to table | 100 | Unit:mm | |
| Distance spindle to table | Min150-Max670 | Unit:mm | |
| Diameter of the rotary table | Φ650 | Unit:mm | |
| Diameter of C-axis maximum rotary space | Φ850 | Unit:mm | |
| Table max load | 1000 | Unit:KG | |
| Motor-spindle | |||
| Cutting-tool interface | HSK-A63 | ||
| Torque S1/S6 | 83/125 | Unit:NM | |
| Speed max | 18000 | Unit:RPM | |
| Power | 30 | Unit:KW | |
| Through-spindle-coolant | available | ||
| NC Swivel-and-rotary table | |||
| A swivel range | ± 140 degree | ||
| A speed max | 30 | Unit:RPM | |
| C rotary range | N×360degree | ||
| C speed max | 100 | Unit:RPM | |
| A motor | DDR ×2 | 2110NM×2 | |
| C motor | DDR | 964NM | |
| Tool-magazines | |||
| Tool interface | HSK-A63 | ||
| Tool positions | 36T | ||
| Max. Tool diameter | 80MM | ||
| Max. Tool length | 300MM | ||
| Max. Tool weight | 10KG | ||
| Machine size&weight(not including machine accessories) | |||
| width | 2250 | Unit: mm | |
| length | 3800 | Unit: mm | |
| Height: spindle up & down | 2720~3250 | Unit: mm | |
| weight | About 13 | Unit: Ton | |
| others | |||
| Power | 380v in phase 3 | 150KW | |
| Compressed air | 6-8kgf/cm² | ||
| Machine lubrication | T68 guide rail oil | ||
| Spindle cooling | 5#Spindle oil | ||
| Table cooling | distilled water | ||
){kind=link}